Installing the BrightSign Media Player HD224/HD225
1. Position the Media Player
- Location: Place the BrightSign Media Player HD224 in a secure and accessible location where it can connect to the network and interface with other components of your setup.
2. Connect to the Network
- Ethernet Connection:
- Plug one end of an Ethernet cable into the Ethernet port on the BrightSign Media Player HD224.
- Connect the other end of the Ethernet cable to your network router or switch. This connection is necessary for downloading and streaming fitness content and receiving commands from the ProDVX 545 Master Player.
3. Connect to the Display
- HDMI Connection:
- Connect one end of an HDMI cable to the HDMI output port on the BrightSign Media Player HD224.
- Connect the other end of the HDMI cable to the HDMI input on your TV screen.
4. Connect to Power
- Power Connection:
- Plug the power adapter into the power input port on the BrightSign Media Player HD224.
- Connect the power adapter to a power outlet. Ensure the device is properly powered on.
5. Verify and Test
- Power Up:
- Ensure that the BrightSign Media Player HD224 is powered on and that the display shows the content on the screen.
- Test Functionality:
- Verify that the media player can download and stream fitness content as expected. Check that it responds to commands from the ProDVX 545 Master Player, such as playing, pausing, or stopping content.
6. Troubleshooting
-
Connection Issues:
- Check all cables to ensure they are securely connected.
- Verify that the Ethernet connection is active and that the media player is receiving a network signal.
If you have any question, please click here to fill out a quick form, and we’ll get back to you as soon as possible!