How to Navigate FXGYM Multiscreen

How to Navigate FXGYM Multiscreen

Before you start

Make sure the FXGYM Multiscreen interface is open on the ProDVX tablet.

The screens in the training area should already be on and ready to show the selected workout.

Open the workout overview

  1. Use the ProDVX tablet to open the FXGYM Multiscreen interface.
  2. Go to the workout overview.
  3. Choose the workout category you want to use.

The available categories depend on the customer setup. For example, a location may have access to Funxtion workouts, HYROX content or EGYM-related content.

Select a workout

  1. Browse the available workouts.
  2. Select the workout you want to run.
  3. Check the workout name before starting.
  4. If applicable, check that the workout matches the correct room, zone or screen setup.

Start the workout

  1. Press Start on the ProDVX tablet.
  2. Wait for the workout to load on the screens.
  3. Check that all screens show the correct workout content


Control the workout during the session

During the workout, use the ProDVX tablet to control the session.

Common controls include:

  • Pause: temporarily pauses the workout.
  • Resume: continues the workout after pausing.
  • Stop: ends the workout.

The exact controls may depend on the workout type and customer setup.

Check the screens during the workout

After starting the workout, check that:

  • Every screen shows content.
  • Each screen shows the correct zone or station.
  • Timing is running correctly.
  • The workout follows the selected format.

If one screen shows different content than expected, stop the workout if needed and contact Funxtion Support.

Use the timers

Select Timers from the menu on the control tablet.

Choose the required timer:

  • A pre-set workout timer
  • Interval
  • Stopwatch
  • Countdown

Configure the available time, work, rest or round settings and select Start.

The timer is displayed on all screens connected to the FXGYM Multiscreen setup. Use Pause to temporarily pause the timer or Stop to end it.

Optional: HYROX content

If HYROX or EGYM is enabled for the location, extra workout categories or content may be visible in the interface.

If HYROX or EGYM content is not visible, the location may not have access to that content package. Contact Funxtion Support if the content should be available.

Troubleshooting

For technical issues with the control tablet or connected screens, see the FXGYM Multiscreen Troubleshooting Guide.